TFO App - Fatigue Management - Guide

If you are a driver with a Fatigue profile, when you log into the TFO App on your phone or tablet, you will see an information bar on the home page, at the bottom of the screen that will assist with you work/rest status through out your day.
Home Screen Messages
Sign In & Work: Sign on by swiping key fob and start driving for the day.  The tracker will beep when ignition is detected.  Once signed on the tracker will stop beeping & light will flash green. In the TFO App on the Home page, you will see a working tab with a timer to show how long until your next break to the closest hour.
Next Break Due: If you click on the information bar, it will open a larger, more detailed view. This will show you exactly when your next break is due. Work times are set by NHVR Driving Standards.
Break Due: 30 mins before your break is due, the red light on the tracker will blink & beep 3 times in 3 seconds. The App will display Next break In message.
The first break has to be at least 15 minutes. The Asset cannot move during this time or the counter will start again. Your break cannot be broken up. It is a 15 minute solid block of time.
Start break: Press the rest button on the tracker while Asset at a stop.  The information bar in the App will change and show you are on rest.
The light on the Tracker will change to green when enough time has passed for an acceptable break
End break: Press the rest button or drive off
Fatigue: If you do not take a break within the 30 minute warning phase, you will move into Fatigue.  The tracker will emit a constant beep for 2 minutes and the light will be red. After 2 minutes, the beep will stop but the light will stay red.  The TFO App will display a message instructing you to Take Break Now!
The App will then count into negative numbers to show how long has passed since your break was meant to be taken.
TFO App - Fatigue Button
If you click on the Fatigue button option on the TFO App, it will open a new page with detailed information for the day.
The TFO App Fatigue explained:
Name: Assigned drivers name. This is assigned by the KeyFob Sign in	Day End: Estimated end of day counter
Asset ID: Name of the asset being operated	Map: Current GPS location in Map format. Obtained from phone/Ipad or tracker if Location services not on.
Rego: Registration of the asset being operated	New Docket: Click to create a new Docket if needed
Work Option: Shows whether you are on Basic or standard time for fatigue	Existing Docket: Click if you would like to edit or add to an existing Docket.
Engine Started: First ignition on time for the day	Graph: Graph shows work time, rest time and fatigue time. Fatigue is in red on the graph. Graph is shown with times for the day
Pre start Complete: Time that Pre start was completed for the day on this asset	Total Work: Total Work time for the day
Next Break In: Next break time counter	Total Rest: Total rest time added together for the day